The most trusted heat transfer vinyl brand in the world.
Siser HTV Color Comparison Chart
Electrify Your Look with Unique Finishes
If you’re looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you! You’ve never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you’re looking to provide multi-color designs, EasyWeed Electric can be layered. Approximate width is 11.8"
EasyWeed Electric is 90 Microns / 3.5Mils and is a PU composition EasyWeed Electric is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.
Main Features
DIY APPAREL
Personalize t-shirts, hoodies, pants, hats, bags, and so much more! EasyWeed Electric allows you to customize a wide variety of fabrics including cotton, polyester, blends, leather, and more!
EASYWEED ADVANTAGE
EasyWeed Electric is the leading HTV for a reason! Thanks to a sticky carrier backing, weeding even the smallest details is a breeze. EasyWeed Electric also applies with a 1-second tack for layering and can be peeled hot— no cooldown required!
PREMIUM FEEL & QUALITY
EasyWeed Electric is just 90 microns thin which allows designs to feel incredibly lightweight when compared to other, thicker vinyls! Despite it's thinness, EasyWeed Electric is also extremely durable, lasting wash after wash without fading, cracking, or peeling for long-lasting designs.
EASY APPLICATION
EasyWeed Electric was designed to make the heat application process as painless as possible. Apply with a heat press set to 305°F with medium pressure for 15 seconds. You can also apply EasyWeed Electric with a home iron set to "Cotton" or "High"!
Craft Cutter Settings (Chart)
Siser Romeo & Juliet
- Blade: Romeo & Juliet 45°
- Gram Force: 5-10
- Offset: 0.250
- Speed: 10
Brother Scan N Cut DX
- Blade: Autoblade
- Cut Speed: 5
- Half Cut: Auto
Cricut Explore Air
- Blade: AutoBlade, Standard
- Setting: Vinyl+
Cricut Maker
- Blade: AutoBlade, Fine-Point
- Setting: Heat Transfer (Non-Cricut)
Silhouette 4
- Blade: AutoBlade, 3
- Material: Heat Transfer Smooth
- Force: 6
- Speed: 8
Roland GS/GX-24
- Blade: 45°
- Gram Force: 80-90
- Offset: .250
- Speed: 30-50 cm/s
Graphtec
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U+0
- Speed: 30 cm/s
Application Instructions
Iron Instructions
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
Heating Press Instructions
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
EasyWeed Electric Applies To
- 100% cotton
- Poly/cotton blends
- 100% polyester
- Leather
Laundering Instructions
- Wait 24 hours before 1st wash
- Turn item inside out
- Machine wash warm or cold / mild detergent
- Dry on normal dryer setting
- Do not dry clean
