EasyWeed Glow in the Dark HTV 15" Roll

Also Available in Our Retail Store
1001 Knight Avenue, Ponca City, OK 74601
Call for More Information: (580)765-9999

Glow looks great in the daylight and glows in the dark! This polyurethane heat transfer vinyl is available in white and glows green! It cuts and weeds like EasyWeed heat transfer vinyl. To get the glow effect, "charge" the material by exposing it to sunlight. The more light you give it, the brighter and longer it glows in the dark! Glow is great for crafters looking to create costumes, candy bags, and cool blanket forts that shine at bedtime. EasyWeed Glow can even be layered on other Siser materials for an awesome look. Layering EasyWeed Glow on top of white EasyWeed lets you create hidden messages and effects that reveal themselves in the dark. Approximate width is 14.75"

EasyWeed Glow is 85 Microns / 3.35 Mils and is a PU Composition. EasyWeed Glow is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.

Craft Cutter Settings (Chart)
Siser Romeo & Juliet

• Blade: Romeo & Juliet 45°
• Gram Force: 5-10
• Offset: 0.250
• Speed: 10

Brother Scan N Cut DX

• Blade: Autoblade
• Cut Speed: 5
• Half Cut: Auto

Cricut Explore Air

• Blade: AutoBlade, Standard
• Setting: Vinyl+

Cricut Maker

• Blade: AutoBlade, Fine-Point
• Setting: Heat Transfer (Non-Cricut)

Silhouette 4

• Blade: AutoBlade, 3
• Material: Heat Transfer Smooth
• Force: 6
• Speed: 8

Roland GS/GX-24

• Blade: 45°
• Gram Force: 80-90
• Offset: .250
• Speed: 30-50 cm/s

Graphtec

• Blade: 45°
• Gram Force: 8-9
• Tool: CB09U+0
• Speed: 30 cm/s

Application Instructions
Iron Instructions

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or cold

Heating Press Instructions

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

EasyWeed Glow Applies To

• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather

Laundering Instructions

• Wait 24 hours before 1st wash
• Turn item inside out
• Machine wash warm or cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean