The most trusted heat transfer vinyl brand in the world.
Inflation isn't always bad! In fact, when it comes to Heat Transfer Vinyl, it's pretty cool. Easy Puff expands after heat application to create a 3-D appearance with a unique texture every time. Like Siser's other Easy products, Easy Puff is simple to cut, weed, and apply. But you'll be surprised to find Easy Puff up to triple its height after applying heat just once! The puffed up product looks great with designs that favor simple shapes and large elements since small cavities will get swallowed up in the puffing process. Imagine what you can make with this magical HTV - from fluffy bunnies to elevated elements and larger-than-life lettring. It's all possible with Easy Puff!
Easy Puff is 140 Microns / 5.5 Mils and is a PU composition. Easy Puff is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.
Main Features
ELEVATE YOUR DESIGNS
Easy Puff may appear flat at first, but expands into a bold, puffed up finish when applied with a heat press! Add both texture and dimension to your designs with just a single press.
EASY APPLY
Thanks to a lower application temperature of 280°F (138°C) for just 10 seconds, Easy Puff applies to a wide variety of garments easily without leaving scorch marks. **Due to the puff effect, Easy Puff is not recommended for home iron applications**
USE AS A TOP LAYER
Looking to add contrast to your designs? Combine Easy Puff with other "flat" materials, such as EasyWeed, by layering Easy Puff on top for unique effects! **Due to the puff effect, Easy Puff should not be used as a bottom layer.
CUTTER FRIENDLY
Works with virtually any craft cutter, including: Silhouette Cameo, Cricut Explore, Cricut Maker, Brother ScanNCut, Roland, Graphtec, and more.
Craft Cutter Settings (Chart)
Siser Romeo & Juliet
- Blade: Romeo & Juliet 45°
- Force: 5-10
- Offset: 0.250
- Speed: 10
Brother Scan N Cut DX
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Cricut Explore Air
- Blade: AutoBlade, Standard
- Setting: Vinyl+/Iron-On
Cricut Maker
- Blade: AutoBlade, Fine-Point
- Setting: Heat Transfer (Non-Cricut)
Silhouette 4
- Blade: AutoBlade, 3
- Material: Heat Transfer Smooth
- Force: 6
- Speed: 8
Roland GS/GX-24
- Blade: 45°
- Gram Force: 90-100
- Offset: .250
- Speed: 30-50 cm/s
Graphtec
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U+0
- Speed: 30 cm/s
Application Instructions
- Thickness: 180 Microns/7.09 Mils
- Applies to: 100% Cotton, 100% Polyester,
- Cotton/Poly Blends
- Temperature: 280°F / 138oC
- Time: 8–10 Seconds, peel carrier, press again for 8–10 seconds
- Pressure: Medium
- Peel: Hot
- Layering: Not Recommended*
Easy Puff is designed to withstand only one heat application. Repeated applications will "flatten" the puff effect permanently. It is recommended to apply Easy Puff last when used with other materials. Easy Puff Metallic differs from our standard Easy Puff line and REQUIRES a 2-press application process. After the first press, the carrier must be peeled hot and the design should be covered with a cover sheet, then pressed a second time to activate the puff effect. Because achieving proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron.
EasyPuff Applies to
- 100% cotton
- Poly/cotton blends
- 100% polyester
Laundering Instructions
- Wait 24 hours before first wash
- Machine wash cold
- Use mild detergent
- Do not bleach or dry clean
- Do not use fabric softener
- Tumble dry on low setting
- Wash inside-out for best results
