Siser EasyWeed Fluorescent HTV 15" Rolls
Also Available in Our Retail Store
1001 Knight Avenue, Ponca City, OK 74601
Call for More Information: (580)765-9999
The most trusted heat transfer vinyl brand in the world.
Why is EasyWeed the number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that’s great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser cutting systems. Approximate width is 14.75"
EasyWeed is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.
Main Features
DIY APPAREL
Personalize t-shirts, hoodies, pants, hats, bags, and so much more! EasyWeed allows you to customize a wide variety of fabrics including cotton, polyester, blends, leather, and more!
EASYWEED ADVANTAGE
EasyWeed is the leading HTV for a reason! Thanks to a sticky carrier backing, weeding even the smallest details is a breeze. EasyWeed also applies with a 1-second tack for layering and can be peeled hot— no cooldown required!
PREMIUM FEEL & QUALITY
EasyWeed is just 90 microns thin which allows designs to feel incredibly lightweight when compared to other, thicker vinyls! Despite it's thinness, EasyWeed is also extremely durable, lasting wash after wash without fading, cracking, or peeling for long-lasting designs.
EASY APPLICATION
EasyWeed was designed to make the heat application process as painless as possible. Apply with a heat press set to 305°F with medium pressure for 15 seconds. You can also apply EasyWeed with a home iron set to "Cotton" or "High"!
Craft Cutter Settings (Chart)
Siser Romeo & Juliet
- Blade: Romeo & Juliet 45°
- Gram Force: 5-10
- Offset: 0.250
- Speed: 10
Brother Scan N Cut DX
- Blade: Autoblade
- Cut Speed: 5
- Half Cut: Auto
Cricut Explore Air
- Blade: AutoBlade, Standard
- Setting: Vinyl+
Cricut Maker
- Blade: AutoBlade, Fine-Point
- Setting: Heat Transfer (Non-Cricut)
Silhouette 4
- Blade: AutoBlade, 3
- Material: Heat Transfer Smooth
- Force: 6
- Speed: 8
Roland GS/GX-24
- Blade: 45°
- Gram Force: 80-90
- Offset: .250
- Speed: 30-50 cm/s
Graphtec
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U+0
- Speed: 30 cm/s
Application Instructions
Iron Instructions
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
Heating Press Instructions
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
EasyWeed Applies to
- 100% cotton
- Poly/cotton blends
- 100% polyester
- Leather
Laundering Instructions
- Wait 24 hours before 1st wash
- Turn item inside out
- Machine wash warm or cold / mild detergent
- Dry on normal dryer setting
- Do not dry clean
