Siser EasyPSV™ Self Adhesive Removable Craft Vinyl
12" width, 24" width, 48" width By The Roll(s)
If you own a store and are interested in becoming a Siser Reseller. Please contact us.
Stick it, Switch it, Smile!
Create worry-free décor that can be changed repeatedly using EasyPSV™ Removable by Siser®. This temporary pressure sensitive vinyl takes the guesswork out of decorating. You don’t have to wonder if the adhesive vinyl will leave a gluey mess behind, or even worse, take some of the wall with it! EasyPSV Removable comes off cleanly and quickly without any special tools or solvents for care free customizing!
While EasyPSV Removable lasts 2-3 years, you can choose to change it up at any time, and with a stylish matte finish who wouldn’t? Plus EasyPSV Removable even includes chalkboard! Use this black, textured vinyl to turn any hard surface into a writable chalkboard that’s compatible with soft chalk, standard chalk, and chalk ink markers. But the best part is, you can layer EasyPSV Permanent on top of EasyPSV Removable for temporary decals that have virtually endless color and finish combinations! Comparable to the 631 craft vinyl.
|
Cricut:
• Blade: Standard
• Setting: Vinyl
|
Silhouette:
• Blade: Standard, 2
• Material: Vinyl, Glossy
• Speed: 7
• Force: 12
|
Brother:
• Blade: Standard, 3
• Cut Speed: 1
• Cut Pressure: 1
|
Roland GX-24:
• Blade: 45°
• Gram Force: 80-110
• Offset: .25
• Speed: 50 cm/s
|
|
|
|
|
|
|
|
|
|
Please Note: The indicated cut settings are based upon tests believed to be reliable and true. Due to the varying conditions of every individual’s blade, cutting strip, cutting mat, and other accessories, the given values are only intended as a starting point. Therefore, they’re given without guarantee and do not constitute a warranty. The purchaser should independently determine their ideal cut settings through test cuts when using different materials or colors of a material.
Application Instructions
• Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
• Weed excess vinyl.
• Remove the application tape’s paper liner and place tape on top of EasyPSV.
• Burnish with a squeegee.
• Lift the application tape and EasyPSV away from the paper liner.
• Place the application tape on your desired object.
• Burnish with a squeegee to fully adhere the EasyPSV decoration.
• Gently peel away the application tape, leaving just your EasyPSV design on the object.
